© Ashcroft Inc. 2013 I&M008-10080-10/13 Rev. E GBE Digital Test GaugeOperatingInstructionsI&M008 10080 Rev. E_layout 10/14/13 9:35 AM Page
– 10 –To use the AUTO OFF option:Step 1: Press the CONFIG key until the wordAUTO OFF appears.Step 2: Press the ENTER key.Step 3: Press the CONFIG key
– 11 –DAMPING: with six different options, this modeallows for taking process pressure readings andaveraging them. This option is particularly usefulw
– 12 –To access the factory default password:Step 1: Press the CONFIG key until the word CALIBRAT appears.Step 2: Press the ENTER key.Step 3: The lett
– 13 –Zero Calibration:Step 14: Press the CONFIG key once and the wordCALIBRA appears. Press ENTER. (Thismode allows for 0 and full- scale adjust-ment
– 14 –Step 1: Press the CONFIG key until the word ZEROSP appears.Step 2: Press ENTER.Step 3: Enter user five digit password (PW). This isthe same pass
– 15 –If the user password is lost or stolen, contactAshcroft Inc., customer service at (203) 378-8281 for a new factory password that will allowthe u
– 16 –mmH2O mPa mBar/cmH2O kPa(Gauge) (Gauge) (Gauge) (Gauge)3000 1 250 255000 1.6 300 4010,000 2.5 400 606 500 10010 600 16040 1000 2501600 4002000 6
– 17 –Type 2089 (0.05% accuracy), 2086 (0.10% accuracy),2084 (0.25% accuracy)Accuracy 0.05%, 0.10%, 0.25% all Full Scale Terminal Point TotalError Ban
– 18 –Enter Selects Items In CONFIG MenuConfig ModeAllows Scrolling Through CONFIG MenusEngineering UnitsPsi, ˝Hg, ˝H2O (with three temperature option
– 19 –Gauge Installation:Pipe Mount – The Ashcroft digital test gauge comes standard witha1⁄4 NPT connection. Good piping practices recommend usingtef
– 2–I&M008 10080 Rev. E_layout 10/14/13 9:35 AM Page 2
Ashcroft Inc.250 Main StreetStratford, CT 06614-5145Tel: (203) 378-8281Fax: (203) 385-0602e-mail: [email protected]© Ashcroft Inc. 201
– 3–Congratulations on your purchase of the Ashcroft®digital test gauge with total error band full-scaleaccuracy and the largest display readout in th
– 4–I&M008 10080 Rev. E_layout 10/14/13 9:35 AM Page 4
– 5–TABLE OF CONTENTSPageQuick Reference Guide 6-7Keypad Functions 8• ON/OFF KEY• BACKLITE KEY• MIN/MAX KEY• ZERO/CLEAR KEY• ENTER KEY• CONFIG KEYConf
– 6–Bar graph% of full scaleFlashing display when unit pressured below zeroPress to indicate minimum or maximum pressure gauge has measuredPress again
– 7–While in unit of measurement mode (eg: psi),press the ZERO CLEAR button to rezero thegauge. This feature functions when displayedpressure is withi
– 8–Turns the gauge on and off. When pressing theON/OFF key while in the off position, gauge start-up display first indicates the software version fol
– 9–UNITS: 12 units of measurement are available,both English and metric, by cycling through theUNITS key; psi, ˝Hg, ˝H2O (with three temperatureopti
Commentaires sur ces manuels